Stop rot, pests, and water damage before they reach your roof deck.

Fascia Repair Conroe TX That Protects Your Roof Edge

When fascia boards rot, water finds a path behind your gutters and into the roof edge. Our fascia repair Conroe TX service replaces damaged boards, reseals drip edge, and restores the trim line so your roof shed water the way it should. We handle residential fascia repair Conroe TX for homes in Montgomery County and the surrounding communities, from single-board fixes to full-perimeter replacements after a storm.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

Call Now (936) 305-7093 → No spam. No obligation. Just practical help.
roofer for conroe homes
Careful work. Honest options.
About this service

What Fascia Repair Conroe TX Actually Involves

Fascia repair Conroe TX is the removal and replacement of the horizontal boards that cap your roof's rafter ends, plus the sealing work that keeps water from getting behind them. The fascia holds your gutters, supports the drip edge, and closes the gap between the roof deck and the outside air. When a board softens from moisture, the gutter sags, the drip edge pulls loose, and water starts wicking into the soffit and attic. We cut out the rot, sister in new lumber, and reattach every component in the correct order so the edge performs as a system, not a patch.

Conroe homes take a beating from humidity, summer heat that pushes past 100 degrees, and spring storms that drive rain sideways under the shingles. That combination rots fascia faster than most homeowners expect. If you have been searching for fascia repair near me Conroe TX and finding only general handymen, you want a crew that understands how the roof edge ties into the shingles, underlayment, and gutter. We see fascia rot most often on the south and west faces of homes in River Plantation and Panorama Village, where sun exposure and prevailing storm direction do the most damage.

  • ✓ Stop Hidden Water Damage
  • ✓ Keep Gutters Attached
  • ✓ Block Pests and Drafts
  • ✓ Restore Curb Appeal
What's included

What Our Fascia Repair Service Includes

Every fascia repair job is different, but most include the same core work. Here is what you get when you hire us for fascia repair in Conroe. If your job needs something outside this list, we tell you upfront and price it separately so there are no surprises.

✓

Full Roof Edge Inspection

We probe the fascia with a moisture meter, check the soffit and drip edge, and inspect the gutter attachment points. On two-story homes we use a drone to see the full perimeter. You get photos of every problem area.

✓

Rotted Board Removal

We cut out all soft or damaged fascia and take it back to solid wood. We inspect the rafter tails and sheathing underneath. If the damage goes deeper than the fascia, we show you and explain what it takes to fix it.

✓

New Fascia Installation

We install new fascia boards sized to match your existing edge, then reattach the drip edge and seal every joint with roof sealant rated for Texas heat. The new boards are primed and ready for paint.

✓

Gutter Reattachment

We rehang your gutters on the new lumber using fresh hangers, not the old screw holes. We check the slope so water flows to the downspouts instead of pooling. If a gutter section is too damaged to reuse, we tell you.

✓

Soffit Repair If Needed

When fascia rot has spread into the soffit, we replace those panels at the same time. This keeps the roof edge uniform and makes sure the soffit vents still move air into the attic the way they should.

✓

Cleanup and Walkthrough

We sweep the work area, run a magnet over the ground for nails, and walk the perimeter with you. You see the new boards, confirm the gutters drain, and get your workmanship warranty information before we leave.

How it works

Our Fascia Repair Process, Step by Step

01

Roof Edge Inspection

We walk the perimeter, probe the fascia with a moisture meter, and check the soffit, drip edge, and gutter attachment points. On two-story sections we use a ladder and safety harness, and on steep or complex roofs we send a drone up for a full view. You get photos of every problem area before we quote anything.

02

Written Scope and Price

You receive a line-item scope: how many linear feet of fascia, what lumber, whether soffit or drip edge needs replacement, and the price. No vague allowances. Most single-family fascia jobs in Conroe fall between $450 and $2,800 depending on linear footage and access, and we tell you where your job lands before we start.

03

Tear-Out and Rot Removal

We pull the damaged boards with a pry bar and roofing shovel, cut back to solid wood, and inspect the rafter tails and sheathing. Any soft sheathing gets marked and replaced. We tarp the area if rain is in the forecast, and we keep the work zone swept so nails do not end up in your driveway.

04

New Fascia and Sealing

We install new fascia boards, reattach the drip edge, and seal every joint with roof sealant rated for Texas heat. If the soffit is damaged, we replace those panels at the same time so the edge is uniform. Gutter hangers go back into solid lumber, not the old rotted holes.

05

Final Walkthrough

We walk the perimeter with you, show the new boards, confirm the gutters drain, and clean up every scrap. You get a workmanship warranty on the installation. If we found anything else on the roof during the inspection, we tell you now, not six months from now when it becomes a leak.

Tools & methods

Tools and Methods We Use for Fascia Repair

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Moisture Meter

We use a moisture meter to find rot that is not visible from the surface. It tells us exactly where the damage stops so we only replace what needs replacing.

Infrared Camera

On interior inspections, an infrared camera shows us temperature differences that indicate hidden moisture behind walls or in the attic. It helps us trace leaks back to the roof edge.

Drone

For two-story homes and steep roofs, we fly a drone to get a full view of the fascia, soffit, and gutter line. You get photos of every problem area without anyone climbing a ladder.

Pry Bar and Roofing Shovel

We use a pry bar and roofing shovel to remove damaged fascia boards without damaging the surrounding shingles or drip edge. Clean removal makes the new installation fit tighter.

Caulking Gun and Roof Sealant

We seal every joint and fastener with roof sealant rated for Texas heat. This keeps water from getting behind the new boards and extends the life of the repair.

Ladder and Safety Harness

We use ladders and safety harnesses on every job, and we follow OSHA 10 and OSHA 30 safety standards. That protects our crew and your property.

Tarp

If rain is in the forecast or we find an open section during inspection, we tarp the area immediately to keep water out until we can complete the repair.

Real results

Before and after.

Rotted Fascia Replaced in River Plantation

Before

A homeowner in River Plantation had gutters sagging on the west side of the house. The fascia behind them was soft and crumbled when probed. About 35 linear feet of fascia was rotted, and the drip edge was pulled loose.

After

We replaced 35 linear feet of fascia, reinstalled the drip edge, and rehung the gutters on new lumber. The gutters now drain properly, and the roof edge is solid. The homeowner also avoided the decking damage that was starting to show.

Storm-Damaged Fascia Repaired in Panorama Village

Before

A spring storm tore fascia boards loose on a home in Panorama Village and left the roof edge open. Rain was getting into the soffit, and the homeowner was worried about a ceiling leak.

After

We tarped the open section the same day and returned two days later with new fascia boards and drip edge. The repair took one day. We documented the damage with photos, and the homeowner filed an insurance claim that covered most of the cost.

Full Perimeter Fascia Replacement in Woodforest

Before

A homeowner in Woodforest had fascia rot on the north and east sides of the house. The boards were soft, the paint was peeling, and wasps were getting into the soffit. About 80 linear feet of fascia needed replacement, plus some soffit panels.

After

We replaced 80 linear feet of fascia and 12 soffit panels. We sealed every joint and checked the soffit vents. The roof edge is now uniform, the pests are locked out, and the home looks maintained from the street.

Problems we solve

Fascia Problems We Fix for Conroe Homeowners

Fascia damage shows up in a few predictable ways. If you are seeing any of these, the problem is likely bigger than it looks from the ground. Here is what we find and how we fix it.

Ask a pro →
01

Gutters sagging away from the roofline

We remove the gutter, replace the rotted fascia behind it, and rehang the gutter on solid lumber with new hangers. We check the slope so water flows to the downspouts. Most sagging gutters we see in Conroe are a fascia problem, not a gutter problem.

↗
02

Peeling paint and soft wood on the fascia boards

We probe the board with a moisture meter to find the true extent of the rot. If the wood is firm, we scrape, prime, and seal. If it is soft, we cut it out and replace it. We do not paint over rot and call it fixed.

↗
03

Water stains on the soffit or ceiling near the roof edge

We trace the water back to its entry point, which is often a failed drip edge or a gap where the fascia meets the shingles. We repair the fascia, reseal the drip edge, and confirm the fix with a water test before we close up.

↗
04

Pests entering through gaps at the roof edge

We replace the damaged fascia and soffit panels, closing the gaps completely. We also check the soffit vents to make sure they are screened and intact. If we find active pest damage, we tell you so you can call an exterminator before we seal things up.

↗
Proof you can check

Licensed, Certified, and Local

✓
HAAG Certified InspectorHAAG Engineering
✓
GAF Master EliteGAF
✓
Owens Corning PreferredOwens Corning
✓
NRCA MemberNational Roofing Contractors Association
✓
OSHA 10 and OSHA 30Occupational Safety and Health Administration
Customer reviews

What Conroe Homeowners Say

★★★★★
“We had a gutter pulling away from the house and assumed it was the gutter. Conroe Shield showed us the fascia behind it was completely rotted. They replaced about 30 feet of fascia, rehung the gutter, and sealed everything. The price matched the quote exactly. Two months later, no sag and no leaks.”
MR

Mark R.Homeowner, River Plantation

✓ Verified
★★★★★
“I had fascia rot on the north side that I had been ignoring for two years. They cut out the bad wood, replaced the soffit panels that were damaged, and resealed the drip edge. The crew cleaned up so well you could not tell they had been there except for the new boards. Worth every penny.”
JT

James T.Homeowner, Woodforest

✓ Verified
Good questions

Fascia Repair Questions Conroe Homeowners Ask

(936) 305-7093 →

Most fascia repair jobs in Conroe run $450 to $2,800, with the average single-story home landing around $900 to $1,400. Price depends on linear feet, whether soffit or drip edge is included, and access. Two-story sections and steep roofs cost more because of setup and safety equipment. We give you a written price before any work starts.

Small sections can be repaired, but rotted fascia usually needs replacement. Once wood softens, it will not hold gutter screws or sealant, and the rot spreads. We cut back to solid lumber and replace the board. If only the paint is peeling and the wood is firm, we can scrape, prime, and seal instead, which saves money.

You want a licensed roofing contractor, not a general handyman. Fascia ties into the drip edge and roof deck, and a roofer can spot related problems while they are up there. Conroe Shield Roofing has handled fascia repair in Conroe since 2012. Call (936) 305-7093 and we will schedule an inspection.

Most residential fascia repairs take one to two days. A single-board fix can be done in two to four hours. Full-perimeter replacement on a large home with soffit work can run three days. We tell you the expected timeline in the written scope so you can plan around it. Weather delays are rare but we will call you if rain pushes the schedule.

Ready when you are

Get Your Fascia Repair Conroe TX Estimate Today

Call (936) 305-7093 and we will schedule a same-day or next-day inspection. You get photos, a written scope, and a firm price before any work begins. We are licensed, insured, and have been repairing roofs in Montgomery County since 2012.

Schedule Inspection (936) 305-7093 →
Request an appointment

Contact Conroe Shield Roofing

Call us at (936) 305-7093 or email info@conroeshieldroofing.com and we will get you scheduled. We answer 24/7 for emergencies and return non-urgent calls the same business day. Free estimates across Conroe and Montgomery County.

Tap to call(936) 305-7093