Recurring leaks around the chimney and skylights
We tear off the old roof, replace the chimney flashing and skylight flashing with new metal, and install ice and water shield around every penetration. The leak source is eliminated, not patched.
When you need roof installation Conroe TX homeowners can count on, our GAF Master Elite crews deliver. We install asphalt shingles, metal roofing panels, and tile systems built for Montgomery County heat, hail, and Gulf storms. From Grand Central Park to River Plantation, we handle tear-off, decking, underlayment, and flashing so your new roof protects your home for decades. Free estimates, manufacturer-backed warranties, and a clean job site when we leave.
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now (936) 305-7093 → No spam. No obligation. Just practical help.
Roof installation Conroe TX is the full process of removing your old roofing material, inspecting and repairing the decking, then installing new underlayment, drip edge, ice and water shield, and your chosen top layer, whether that is asphalt shingles, metal roofing panels, or clay tiles. It is not a patch job. We strip the roof to the deck, replace any rotted fascia boards or soffit boards, and rebuild the system so water, wind, and heat all behave the way they should.
Conroe sits in a hail belt. Between the spring storm season and summer heat that pushes attic temperatures past 140 degrees, roofs here take a beating that roofs in milder climates never see. If your shingles are losing granules, your flashing is pulling away from the chimney, or you are seeing ceiling water stains after every storm, a new roof installation is usually cheaper than chasing leaks year after year. We also serve homeowners searching for roof installation near me Conroe TX who want a contractor that actually shows up.
Every roof installation includes the full tear-off, decking inspection, underlayment, flashing, ventilation, and cleanup. We do not cut corners on the parts you cannot see. Here is what you get when we install your roof.
We remove all old roofing material down to the deck, including shingles, underlayment, and old flashing. We haul it away in a dumpster and magnet-sweep your yard for nails. No layering new shingles over old ones.
We walk the deck and replace any rotted or delaminated plywood. If we find soft spots around chimneys or valleys, we fix them before installing new underlayment. A solid deck is the foundation of a roof that lasts.
We install synthetic underlayment across the entire roof and ice and water shield in valleys, around penetrations, and along eaves. This is your secondary barrier against water intrusion when wind-driven rain gets past the shingles.
New drip edge on eaves and rakes, new pipe boots, new chimney flashing, and new valley flashing. We do not reuse old flashing. Every transition point gets new metal and fresh sealant so leaks do not start at year five.
We install ridge vents and verify your soffit vents are clear and adequate. Balanced attic ventilation keeps your attic cooler, extends shingle life, and reduces cooling costs. We check the math on intake and exhaust before we close up the roof.
We magnet-sweep the yard and driveway, haul away the dumpster, and walk the roof with you. You get your manufacturer warranty registered in your name and a written workmanship warranty from us. If you find a nail later, call us.
We walk your roof, check the attic with a moisture meter and infrared camera, and document everything with drone photos. You get a written scope showing exactly what is wrong and what we recommend. Takes about 45 minutes. No charge, no pressure.
We bring samples of GAF Timberline, Owens Corning Duration, and metal roofing panels to your kitchen table. You pick the color and profile. We explain the difference between a 30-year and a 50-year shingle and what makes sense for your budget and how long you plan to stay.
Crews arrive by 7 a.m. with tarps down and dumpster in place. We strip the old roof to the deck, replace any rotted fascia boards or soffit boards, and renail loose decking. Most tear-offs take one day. We magnet-sweep the yard twice before we leave.
We install ice and water shield in valleys, synthetic underlayment across the field, drip edge on eaves and rakes, then the shingles or panels. Ridge vents, pipe boots, and chimney flashing go on last. A typical shingle roof takes two to three days from tear-off to final nail.
We walk the roof with you, show you the flashing details, and confirm the attic ventilation is balanced. You get your warranty paperwork and a magnet sweep of the driveway and flower beds. If you find a nail next week, call us and we will come back.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
For fast, consistent nail placement through shingles and underlayment. We set the depth so nails seat properly without tearing the shingle.
For tearing off old shingles and underlayment without damaging the deck. The right tools make tear-off faster and cleaner.
For finding hidden moisture in the deck and attic. These tools tell us where water has been, even if the surface looks dry.
For capturing high-resolution photos of your roof before and after installation. You see exactly what we see, without anyone climbing a ladder.
For keeping our crews safe on steep pitches and two-story homes. OSHA-compliant fall protection is non-negotiable on every job.
For sealing flashing, pipe boots, and penetrations with roof cement and high-quality sealant. We use materials rated for Texas heat.
For protecting your roof and belongings if weather moves in mid-job. We tarp exposed areas before we leave the site each day.
A 16-year-old 3-tab shingle roof with widespread hail bruising, granule loss, and three active leaks. The homeowner had been patching the same spots for two years. Insurance approved a full replacement after we documented the damage.
We installed a new GAF Timberline roof with synthetic underlayment, ice and water shield in valleys, new pipe boots, and new chimney flashing. The installation took two days. The homeowner's insurance covered the cost minus deductible.
An older home with a leaking chimney that had been patched multiple times. The decking around the chimney was soft and rotted. The homeowner was seeing water stains on the ceiling every time it rained.
We tore off the old roof, replaced the rotted decking, installed new chimney flashing and counterflashing, and installed a new Owens Corning Duration roof. The leak is gone, and the attic is dry. Installation took three days because of the decking repair.
A 12-year-old home with builder-grade shingles and poor attic ventilation. Summer attic temperatures were hitting 145 degrees, and the homeowner's electric bills were over $300 a month. The roof was showing granule loss and early cracking.
We installed a new GAF Timberline roof with ridge vents and verified soffit vents were clear. Attic temperatures dropped by 25 degrees. The homeowner reported a $60 monthly reduction in cooling costs. Installation took two days.
Some roof problems are worth repairing. Others mean it is time for a new roof. Here is what we see most often in Conroe and how a new installation solves it for good.
Ask a pro →We tear off the old roof, replace the chimney flashing and skylight flashing with new metal, and install ice and water shield around every penetration. The leak source is eliminated, not patched.
A new roof installation with GAF Timberline or Owens Corning Duration shingles gives you a fresh layer of granules and a 30- to 50-year warranty. We also check attic ventilation because poor ventilation accelerates granule loss.
We inspect with drone photos, document the hail damage, and work with your adjuster. If the claim is approved, we install a new roof and handle the paperwork. You get a new roof for your deductible.
During your roof installation, we replace rotted fascia and soffit, install new drip edge, and can add new gutters and downspouts. The water problem is fixed at the source.
“We had hail damage from the spring storms and three roofers told us we needed a full replacement. Conroe Shield was the only one who got on the roof, took drone photos, and showed us exactly what was damaged. They installed a new GAF Timberline roof in two days. Clean crew, no nails in the yard, and the warranty paperwork was in my inbox before they left.”
Mark R.Homeowner, River Plantation
✓ Verified“Our old roof was 18 years old and we were getting leaks around the chimney every time it rained. Conroe Shield replaced the roof and rebuilt the chimney flashing. They also added ridge vents because our attic was baking. First summer after the install, our electric bill dropped about $60 a month. Worth every penny.”
Jennifer L.Homeowner, Grand Central Park
✓ Verified“I got four quotes for a metal roof installation. Conroe Shield was not the cheapest, but they were the only ones who explained the difference between the panel profiles and showed me how they would handle the valleys. The crew was professional, the job site was clean, and the roof looks great. Two years in, no issues.”
David C.Homeowner, Panorama Village
✓ VerifiedMost asphalt shingle roof installations in Conroe run $9,000 to $18,000 for an average 2,000-square-foot home, depending on pitch, layers to tear off, and material grade. Metal roofing panels run $18,000 to $35,000. Tile can exceed $40,000. We give you a written estimate after inspecting your roof, so you know the real number before we start.
A typical shingle roof takes two to three days from tear-off to final cleanup. Metal roofs take three to five days. Tile roofs can run a week or more. Weather delays happen, especially in spring storm season. We give you a realistic schedule up front and keep you posted if anything shifts.
Conroe Shield Roofing installs roofs across Montgomery County, including Downtown Conroe, River Plantation, Panorama Village, April Sound, Bentwater, Grand Central Park, and Woodforest. We are GAF Master Elite certified, locally owned since 2012, and we do not subcontract our install crews. Call (936) 305-7093 for a free estimate.
Every installation includes tear-off of the old roof, decking inspection and repair, synthetic underlayment, ice and water shield in valleys, drip edge, new pipe boots, chimney flashing, ridge vents, and a magnet sweep of your yard. We also register your manufacturer warranty. Gutters and downspouts are add-ons if you want them replaced at the same time.
We give free written estimates, show you drone photos of your roof, and explain your options without pressure. GAF Master Elite certified, locally owned since 2012, and backed by manufacturer warranties. Call (936) 305-7093 or fill out the form to schedule your inspection.
Get Free Estimate (936) 305-7093 →Call us at (936) 305-7093 or email info@conroeshieldroofing.com and we will get you scheduled. We answer 24/7 for emergencies and return non-urgent calls the same business day. Free estimates across Conroe and Montgomery County.