Leaking skylight flashing
We remove the old flashing, inspect the decking for rot, and rebuild the curb with new ice and water shield and step flashing. We use Velux flashing kits and GAF materials to ensure a watertight seal.
If you want more natural light without a leak, skylight installation conroe TX homeowners trust starts with proper flashing and a watertight seal. We install Velux and industry-standard skylights on shingle, metal, and flat roofs across Conroe and Montgomery County. Every job includes new underlayment, ice and water shield, and a written workmanship warranty. Call (936) 305-7093 for a same-day estimate.
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now (936) 305-7093 → No spam. No obligation. Just practical help.
Skylight installation conroe TX is the process of cutting a framed opening through your roof deck, building a curb or deck-mount base, and setting a factory-sealed glass or acrylic unit with layered flashing that sheds water away from the opening. A proper install uses ice and water shield, step flashing, and a roofing nail gun to tie the new unit into your existing shingles or metal panels. Done wrong, a skylight is a permanent leak. Done right, it adds daylight and resale value for decades.
Conroe sits in a hail and wind corridor, and most homes here have asphalt shingles that take a beating from spring storms. If you have been searching for skylight installation near me conroe TX, you already know that a cheap install can mean ceiling water stains within a year. We have been installing and repairing skylights since 2012, and we treat every opening like a future leak waiting to happen. That is why we use Velux curb-mount units and GAF flashing kits on nearly every job.
We do not sub out skylight work. Our own licensed crew handles everything from the first inspection to the final walkthrough. Here is what you get when you hire us for skylight installation in Conroe.
We supply and install Velux deck-mount or curb-mount skylights with low-E glass. You pick the size and venting style. We bring samples to your estimate so you can see the difference.
We cut the opening, frame it with 2x6 or 2x8 lumber, and replace any soft decking we find. The curb is built to the skylight manufacturer's specs for a proper fit.
We install a full layer of ice and water shield around the opening before any flashing goes down. This is your second line of defense against wind-driven rain.
We layer step flashing, counter-flashing, and drip edge in the correct sequence. On shingle roofs, we weave the flashing into the courses so water cannot get behind it.
We replace the shingles around the skylight with matching material and seal every nail head with roof cement. The finished job looks like the skylight was always there.
You get a 10-year workmanship warranty and before-and-after photos of the flashing and underlayment. We also register the manufacturer warranty on the skylight for you.
We start with a full roof inspection using a moisture meter and infrared camera to check for hidden leaks or soft decking. If your shingles are near the end of their life, we tell you before we cut a hole. You get a written estimate the same day, usually within two hours.
We mark the opening from inside the attic, checking for rafters, wiring, and HVAC runs. You pick the skylight size and glass type, and we confirm the curb height and flashing kit. We also check attic ventilation to make sure the new opening will not create a condensation problem.
We cut the roof deck with a utility knife and roofing shovel, then frame the opening with 2x6 or 2x8 lumber. The curb is built to Velux specs, and we install ice and water shield around the opening before any flashing goes down. This is the step that separates a dry skylight from a leaky one.
We set the Velux unit on the curb, then layer step flashing, drip edge, and roof sealant in the correct sequence. On shingle roofs, we weave the flashing into the courses so water never gets behind it. Every nail gets covered with roof cement, and we use a caulking gun to seal the edges.
We replace the shingles around the skylight, check the interior shaft for gaps, and run a water test. Then we walk you through the install, show you the photos we took, and hand you the warranty paperwork. If you want, we will set up a reminder for a one-year checkup.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
We use a pneumatic roofing nail gun to secure shingles and flashing quickly and consistently. Proper nail placement is critical for a watertight seal.
We check for hidden moisture in the decking and attic before we cut. This helps us find existing leaks that could complicate the skylight install.
We use a drone to inspect steep or tall roofs without walking them. You get clear photos of the roof condition before we start.
We seal every nail head, flashing edge, and curb joint with roof sealant. We use high-quality sealants that stay flexible in Texas heat.
Our crews are OSHA 10 and OSHA 30 certified. We use safety harnesses and proper ladder setup on every job.
We remove shingles and cut the roof deck cleanly. Sharp tools mean less mess and a cleaner opening for the skylight.
A homeowner in River Plantation had a 20-year-old skylight that leaked every time it rained. The ceiling had water stains, and the decking around the opening was soft. The old flashing was rusted and the seal was gone.
We removed the old unit, replaced the rotted decking, and installed a new Velux skylight with fresh ice and water shield and step flashing. The leak stopped immediately, and the homeowner painted the ceiling. Total job time was six hours.
A homeowner in April Sound was replacing their roof after a hail storm. They wanted to add a skylight in the living room but were told it would be too expensive to do separately.
We installed a 2x4 Velux skylight during the roof replacement. Because the roof was already torn off, we framed and flashed the opening in two hours. The homeowner saved $800 compared to a standalone install.
A 1950s home in Downtown Conroe had a dark, damp bathroom with no window. The exhaust fan was not keeping up, and the homeowner was worried about mold.
We installed a vented Velux skylight that opens to release steam. We also added a ridge vent to improve attic ventilation. The bathroom now dries out quickly, and the natural light makes the space feel twice as big.
A skylight should bring light, not leaks. Here are the most common problems we fix when we install or replace skylights in Conroe.
Ask a pro →We remove the old flashing, inspect the decking for rot, and rebuild the curb with new ice and water shield and step flashing. We use Velux flashing kits and GAF materials to ensure a watertight seal.
We replace the skylight unit with a new Velux low-E model. We also check the curb and flashing while we are up there, so you do not pay twice for the same access.
We tear out the old install, rebuild the curb to spec, and flash it correctly. We take photos at every stage so you can see the difference between the old work and ours.
We balance your attic ventilation by adding ridge vents or soffit vents. We also check the interior seal and insulate the shaft to prevent warm air from meeting cold glass.
“We had two Velux skylights installed in our living room. The crew showed up at 8 a.m. and were done by 3 p.m. They used ice and water shield and showed us photos of the flashing before they put the shingles back. We have had two heavy rains since and not a drop. Worth every penny.”
Sarah M.Homeowner, River Plantation
✓ Verified“Our old skylight leaked for years. Conroe Shield replaced it with a new Velux unit and re-flashed the whole opening. They also found a soft spot in the decking and fixed it. The price was fair and the workmanship is solid. I would use them again.”
David R.Homeowner, April Sound
✓ Verified“I was nervous about cutting a hole in my roof, but the team explained every step. They used a drone to check the roof first and gave me a written estimate. The skylight looks great and my kitchen is so much brighter. The 10-year warranty sealed the deal.”
Linda K.Homeowner, Downtown Conroe
✓ VerifiedMost skylight installations in Conroe run $1,200 to $3,500 per unit, depending on size, roof pitch, and whether you need framing changes. A standard 2x4 Velux unit on a shingle roof is usually on the lower end. Flat roof or tile roof installs cost more because the flashing is more complex. We give you a written price before we start, and we do not add surprise charges.
A single skylight on a shingle roof takes four to six hours from setup to cleanup. If we are installing two or three units, plan on a full day. Flat roof or tile roof jobs can take longer because the flashing takes more time. We usually start in the morning and have your roof watertight before we leave that afternoon.
Conroe Shield Roofing installs skylights across Conroe and Montgomery County. We are a licensed and insured roofing company with 14 years in business, and we have installed over 400 skylights since 2012. We use Velux skylights and GAF flashing kits, and we back every install with a 10-year workmanship warranty. Call (936) 305-7093 to schedule a free estimate.
Our skylight installation includes the Velux skylight unit, curb framing, ice and water shield, step flashing, drip edge, roof sealant, and new shingles around the opening. We also handle the interior shaft finishing if you want, and we register the manufacturer warranty for you. You get before-and-after photos and a written workmanship warranty. We do not sub the work out.
Call (936) 305-7093 for a free, same-day estimate on skylight installation. We are licensed, insured, and we back every install with a 10-year workmanship warranty. If you want more light without the leaks, we are the crew to call.
Get Free Estimate (936) 305-7093 →Call us at (936) 305-7093 or email info@conroeshieldroofing.com and we will get you scheduled. We answer 24/7 for emergencies and return non-urgent calls the same business day. Free estimates across Conroe and Montgomery County.